Water can cause a lot of damage if there is a leak or another problem with the main pipes. Many homes were built with the pipes that go through the walls, under the floor, or above the ceiling.
This makes them hard to get to without causing additional damage. When a pipe is leaking water it can cause damage to the structure of the home and cause the wood to warp. This can damage the walls or lead to lumps developing under the carpet.
If the leak is on the ceiling it can lead to a collapse which will cause damage to whatever was underneath it. The homeowner needs to take proactive measures to protect their home. It will be easier and cheaper for you to make small repairs than to have to deal with structural damage.
You can purchase a thermographic camera to check for leaks. But it is kind of overwhelming to choose the right camera for your need with so many brand out there. Therefore i give you two option below, these are best thermal imaging camera for water leaks
Best Thermal Imaging Cameras for Water Leaks
1.) FLIR C2 Thermal Camera
This camera is small enough to fit into a bag so that inspectors can carry it with them to the home or use it anywhere in the home. The camera will show the temperature on the screen in two ways. You can listen to an audible detail too. There will be different sounds that go with different temperature ranges.
Features of the Camera
The FLIR 2C has MSX image technology so that the thermal details are easier to see and it is easier to see the problem areas. The camera can take up to 500 radiometric thermal images. Each of the images is 4800 pixels which allow the camera to be very accurate.
The temperate range on the camera will show from 14 to 302 degrees Fahrenheit. This is good for home and professional use. The cameras have a resolution of 80X 60.
The camera has an automatic shutoff which will help conserve the life of the battery. The camera can use visible light and thermal images. The visible light will be shown on the thermal image to see any differences in temperature in real-time.
The screen on the camera is 3 inches wide and can be used to find hot spots and look for heat loss that may signal a leak. The camera can show a view of 45-degree angles. The FLIR software will allow the users to change the colors, look for small details, and capture thermal images.
- Large field of view
- Large camera display areas
- There is some lag when the photos are being calibrated
2.) Seek Thermal Reveal
This camera is also small enough to fit into a pocket. Some settings are fully customizable. You can select your light levels, options for the images, and you can select a power setting.
This camera can take thermal images and allows them to be saved and even transferred to other devices. The camera is great for detecting leaks in the household.
Features of this Camera
The camera has a good grip and it has a 36-degree angle for the field of view. It can scan the room without a problem. The temperature can detect from -40 degrees Fahrenheit to 626 degrees. The thermal images are automatically saved on the SD card so they can be accessed at any time.
The camera has a rechargeable battery that will last for 10 hours. It can be used for a long home inspection.
The LCD color screen will allow the camera to detect everything it is pointed out. This camera is of high quality and will work well day or night. This camera can even take images in the middle of the night and they will come out clear.
There is a 300 lumen LED light that will help with the darkness. This camera is also used by hunters and electricians. This camera can be used to detect water leaks in the home.
- Great temperature sensitivity
- The emissivity levels and recording video features are not there
3.) Seek Thermal Compact Imager
This leak detection camera is compact and is great for detecting leaks at home. The camera has a double structure and it can be plugged right into a smartphone. The device will be charged from the battery of the home and the screen of the phone can be used to see the heat radiation in the walls or flooring.
Features of this Camera
There is a 36-degree field of view. It can be used indoors or outdoors. There is a zoom feature that will allow you to see images up to 1,000 feet away. The temperature detection range is -40 below Fahrenheit to 626 degrees. The camera can spot leaks and insulation loss.
This is a compact device at 206 X 156 pixels which will turn a smartphone into a thermal camera. There is a 9Hz refresh rate and will be able to detect energy loss outdoors. There are 9 different color settings for the thermal images.
This technology can spot cold spots, hot spots, and even overheated circuits. Homeowners also use this device to help them save on their heating and cooling costs.
There is a lens that can be focused to capture thermal images. The lens can zone in making this camera a favorite of professional contractors. It is easy to use and clear to see.
The thermal imager can detect animals or people when it is dark out. You can bring this camera along on hunting trips once you have finished up in your home.
The imager comes with a waterproof carrying case. This will allow it to be used in different weather conditions without worry about damage. The imager is light and you will not even realize it is still connected to your smartphone. There is an IR energy and it can use 32,000 thermal pixels on the phone display.
- Wide detection
- A smartphone is required for use.
It can take a lot of time and effort to detect leaks when they are in the walls, under the flooring, or in the ceiling. No homeowner wants to do additional damage to the home looking for leaks.
This can cost additional time and money on materials. The thermal imaging cameras are great for detection and they will save both time and money. The FLIR C2 is my top camera picks. The camera is simple to use and it comes with a wide measurement range to detect a large area for leaks.